Deatschwerks Injectors L98/L77/L76/LS3/LSA (SHORT)
DW high flow fuel injectors are only offered in balanced sets processed through our multi-point dynamic flow testing system. This system replicates the dynamic frequencies and pulse widths your injectors experience in your high performance engine to create a set of injectors balanced to within 2% flow variation across the low, transitional, and linear ranges of pulse widths.
DW knows that proper data is required for proper tuning. All DW injectors are fully characterized in-house via SAE J1832 standards. Injector data is available in General Characterization Summaries and Application Specific formats
Proper Data is a Must
The right tool, used incorrectly, yields substandard results at best. Fuel injectors follow this same universal law. Proper data is required for proper tuning. All DW injectors are fully characterized in-house via SAE J1832 standards. Injector data is available in General Characterization Summaries and Application Specific formats. Using the data is easy. Often it is cut and paste from the DW excel sheet to the tuning software.
Development of accurate injector data is a complex process, but there are no shortcuts to a proper calibration. DW has developed specially designed and calibrated flow benches utilizing digital flow meters, which are required to measure the precise fuel mass needed for proper characterizations. The data acquisition process consists of collecting over 450 data points per injector part number. These data points cover pulse widths, pressures, and voltages that the injectors will experience once installed in your engine. The collected data is statically analyzed, scrubbed and formatted into a General Characterization Summary. This Summary can then be formatted into application specific formats for different makes, models, and tuning platforms. The application specific data is then in-car optimized by one of our tuning partners.
Download the data for use with HP Tuners for your injectors here - just match the part number.